Food and Sauces Production Lines

Heavy duty frame built with 2 x 2 x 0.187 square tubes.
Adjustable positioning on most systems to minimize change parts requirements.
48, 60, or 72-inch diameter pre-feeder discs will accommodate a wide range of containers, one inner disc is included.
Capable of handling a wide range of containers, from ounces to gallons.

All contact parts stainless steel, sanitary, Teflon and hoses per your requirements.
Calibrated guide for fast height changeovers.
Wet or dry cleaning options available.
Capable of handling a wide range of containers.

High-precision, electrically-driven ball screw movement, faster and more precise than pneumatic or air over oil systems.
Fill and charge speeds can be better controlled and changes performed at any point of the stroke (i.e., to reduce speed at the end of a fill cycle to avoid splashing).
Handles a wide variety of products and product viscosities.
Capable of handling breakable particulates up to ¾ in diameter.
Reservoir tank mounted directly above rotary valves for direct product feed.

No change of parts needed for a wide range of containers.
4, 6, or 8 spindle machine configurations available, single gear box driven
Independent spring loaded bottle capping discs for better torque and misalignment forgiveness.
Torque can be adjusted while the machine is running (with optional pneumatic clutches)
Clutches located away from capping discs to avoid corrosion

Food and Sauces